Rules for use and care of RAVON products

Rules for use and care of RAVON products

made of Qualtec and Marmonit material.

At RAVON, we create products that are not only beautiful, but above all durable. Each of our products is hand-made with the greatest care, which guarantees exceptional quality and a unique character. We believe that our products will serve for many years, accompanying you in your everyday life. Thanks to our care tips and recommendations, you will maintain their perfect appearance even longer.

INSTALLATION METHOD

  • The bathtub/washbasin should be placed in the selected location and the product should be leveled using the adjustable legs (for the bathtub), which are included in the set. The bathtub should be supported on the legs so that the bathtub casing is raised about 2-5 mm above the floor surface.
  • We connect the product to the water drain using a siphon.
  • The manufacturer recommends securing the product to the substrate using sanitary silicone.
  • We apply silicone to the "housing" of the bathtub/sink locally, and glue it to the substrate in a designated place. The silicone manufacturer places information on the packaging about the time after which the full strength of the joint is achieved. After this time, the product is suitable for use.

CARE

The surfaces of bathtubs/sinks are easy to keep clean. Before using any care or cleaning agent, read the instructions for use.

Daily care:

  • For surface care, the following are recommended: soft dish sponges (only the soft part), body sponges or soft cloths.
  • Scale and rust cleaning fluids with the following composition: sulfamic acid, phosphoric acid; cleaning fluids: 5% non-ionic surfactants or vinegar-based fluid.
  • Disinfectants composed of: sodium hypochlorite, containing active chlorine.

SOAP STAINS REMOVAL

Please apply the liquid to the bathtub/sink, wipe with a soft cloth, then rinse the bathtub thoroughly and wipe dry.

LIMESCALE REMOVAL

Please spray the liquid onto the dirty surface, remove the dirt with the massaging part of the body sponge, rinse the bathtub thoroughly and wipe dry.

WARNING - CANNOT BE USE!

  • Cleansing milk based on powdered calcium carbonate.
  • Cleaning powder containing 5% non-ionic surfactants in the powder.
  • Agents containing abrasive substances, organic solvents and corrosive substances.

SAFE DRAIN DISINFECTION

Please apply disinfectant directly into the drain, wait 15 minutes and rinse the drain and surrounding area thoroughly.

SAFELY UNCLOCK YOUR DRAIN

Sodium hydroxide granules or unblocking liquid should be applied directly into the drain, the residue should be washed into the drain with water at a temperature of approx. 70°C, then wait 15 minutes and rinse thoroughly.

SURFACE IMPREGNATION

We recommend using a beeswax-based polishing wax once a month. Apply the product evenly to the entire bathtub surface with a soft cloth, wait 30 minutes and polish the surface of the product to a shine with a soft cloth.

SPECIAL PRECAUTIONS

Special care should be taken when the bathtub/sink comes into contact with hair dyes. After dyeing your hair, it is absolutely necessary to spray the surface of the bathtub with a liquid agent that meets the above recommendations, wipe with a soft cloth and rinse thoroughly with clean water, and then wipe the surface of the bathtub dry.

Thank you for choosing our products.
The RAVON Team